Plumbers Santa Fe

Your home’s boiler system isn’t just something that comes in handy only during winters but it’s an integral part of your home throughout the year. Of course, just like every other part, your home’s boiler system also requires constant maintenance even if it seems like a struggle sometimes. If you often face the problem of maintenance and don’t know how to go about it, here are the top ten tips which come in handy as told by experts at Caitco Drainworks in Santa Fe, NM:

  1. Thermostat

Thermostats are temperature regulators so to make sure your boiler system is working efficiently, you need to make sure your thermostat is also on the right track.

  1. Heat exchanger

Most problems regarding boilers stem from heat exchangers. If you’re looking into maintaining your home boiler’s performance, you need to make sure the heat exchanger doesn’t develop any leaks. If you notice drops of water or even a pool of water around the exchanger, immediately get it repaired before matters get worse.

  1. Clean boiler

This has got to be the most important tip according to Caitco Drainworks in Santa Fe, NM. Make sure your boiler is clear of any oil residues or other impurities. That means you need to often clear it out and if you don’t then chances are the water will bounce back violently.

  1. Pressure control

If you own a steam boiler then make sure the pressure control is set to the lowest possible. Remember, that’s the only way it’ll work efficiently and also lower your costs.

  1. Ventilation

This is important. You need to make sure your boiler is placed at a position which has adequate ventilation. That means you should clear out anything which could come in between allowing your boiler to breathe.

  1. Burner

Make sure the burner is getting enough air to burn efficiently. If it doesn’t get the adequate amount of air then you’ll be responsible for the damages and future trouble.

  1. Flame

Keep a close lookout for your boiler’s flame. Keep in mind that it’s supposed to be blue instead of orange or red and if it is not blue then you should immediately call your gas company. It could be a sign of a faulty boiler and could be very hazardous for you.

  1. Insulating the pipe

This is also the key to saving money on high bills. Remember to insulate or reinsulated the supply pipe near the boiler pipe.

  1. Bleeding

Your boilers also have the tendency to bleed. That means air has usually entered and this can be found when the boiler is hot at the bottom and cold on the top. All you have to do is release the air by turning the valve and you’ll be good to go.

  1. Servicing

Remember to call your contractor and get the boiler serviced at least twice a year. After all, regular and professional maintenance is all it takes to ensure longevity and efficiency.

Just follow these tips and you’ll have your boiler working in excellent condition. Make sure you have a professional contractor to help you with your boiler problems and if you have a hard time finding one then simply contact us and we’ll help you!